When should I do fall garage door maintenance in Thunder Bay?
Your garage door is about to face its toughest season. In Thunder Bay, deep cold, snow, ice and road salt put every part of the system to the test, and most breakdowns happen on the first very cold days. A little fall garage door maintenance now can prevent a stuck door, a broken spring or a costly emergency call in January.
This checklist takes most homeowners 30 to 60 minutes. It covers the checks you can safely do yourself and explains which jobs to leave to a professional.
What you’ll need
- Silicone or lithium-based garage door lubricant spray
- Clean rags
- A socket wrench set
- A flashlight
- A 2×4 piece of wood (for the safety test)
- A spare battery for your remote
- Replacement bottom seal, if yours is worn
Your 12-point fall garage door maintenance checklist
1. Watch and listen to the door
Run the door up and down a few times. It should move smoothly and steadily. Note any grinding, squeaking, jerking or hesitation. Unusual noises are often the first sign of wear. Our guide Why Is My Garage Door Making a Grinding Noise? explains what each sound means.
2. Inspect the springs and cables (look only)
With the door closed, use a flashlight to look at the springs above the door or along the tracks. Look for gaps in the coils, rust or stretching. Then check the cables at the bottom corners for fraying or loose strands. Don’t touch or adjust these parts. If anything looks wrong, call a professional.
3. Test the door’s balance
With the door fully closed, pull the emergency release cord. Lift the door by hand to about halfway and let go. A balanced door stays in place. If it drifts up or falls, the springs need adjusting by a technician. Close the door and reconnect the opener when you’re done.
4. Test the safety reverse
Lay a 2×4 flat on the floor in the door’s path and close the door with the opener. The door should reverse as soon as it touches the wood. If it doesn’t, stop using the opener and call for service.
5. Check the safety sensors
Wipe the lenses on both sensors near the floor and make sure their indicator lights are steady. Then start closing the door and wave something through the beam. The door should stop and reverse.
6. Lubricate the moving parts
Spray rollers, hinges, the spring coils and the opener chain or screw with a silicone or lithium-based garage door lubricant. Wipe off any extra. Don’t lubricate the tracks, and avoid heavy grease, which thickens in the cold.
7. Clean the tracks
Wipe both tracks with a damp cloth to remove grit, leaves and old grease. Check that they’re straight and that the mounting brackets are tight. Call for service if a track is bent.
8. Tighten the hardware
Use a socket wrench to snug up loose bolts on the hinges and track brackets. Never loosen or adjust the bottom brackets, which are connected to the cables and springs.
9. Inspect the rollers
Look for cracked, chipped or wobbly rollers. Worn rollers cause noise and strain. Nylon rollers with sealed bearings are a quiet upgrade. Leave the bottom rollers to a technician.
10. Check the weather stripping
Close the door, turn off the lights and look for daylight around the edges. Replace a cracked, flattened or brittle bottom seal with a cold-rated one. Learn more in Weather Stripping vs. a New Door: What Actually Stops Drafts.
11. Check the opener and remotes
Replace the remote batteries and keep a spare inside the house, not in the car. Make sure the wall button and any keypad work. If your opener is old, noisy or struggles to lift the door, it may be time to upgrade.
12. Prepare the floor and door for winter
Clear leaves and debris from under the door and fix any spots where water pools. Wash road dirt off the door panels and check for rust or dents. Finally, apply a silicone spray to the bottom seal to help prevent it from freezing to the ground.
Looking for Commercial or Industrial Doors?
Talk to our Overhead Door Experts.
What to leave to a professional
Some parts of a garage door are under high tension or need special tools. Leave these to a trained technician:
- Adjusting or replacing springs
- Replacing cables, drums or bottom brackets
- Rebalancing the door
- Straightening or replacing bent tracks
- Adjusting the opener’s force and travel settings
- Replacing bottom rollers
To understand why, read Torsion vs. Extension Springs: What’s the Difference? and Can I Replace a Garage Door Spring Myself?
A professional fall tune-up covers everything on this list, plus the parts you can’t safely check yourself. It’s the easiest way to make sure your door is ready for winter.
Quick checklist
Print this out or save it to your phone.
- Run the door and listen for unusual noises
- Look at the springs and cables for gaps, rust or fraying (don’t touch)
- Test the door’s balance
- Test the safety reverse with a 2×4
- Clean and test the safety sensors
- Lubricate rollers, hinges, springs and the opener drive
- Wipe the tracks clean (no grease)
- Tighten loose hinge and track bolts
- Check rollers for wear
- Check and replace weather stripping
- Replace remote batteries and test the opener
- Clear the floor, wash the door and treat the bottom seal
- Book a professional tune-up if anything looked wrong
Let us handle your fall tune-up
For 50 years, Lakehead Overhead Door has helped Thunder Bay homeowners get their garage doors ready for winter. Our technicians inspect, adjust and lubricate the whole system, including the springs and cables you shouldn’t touch, so your door is ready for the first cold snap.
- Book a fall tune-up
- Ask about our maintenance programs
- Book a free phone consultation
- Call (807) 623-1721. We offer 24-hour emergency service.
Lakehead Overhead Door · 927 Alloy Drive, Thunder Bay, ON P7B 5Z8
Frequently asked questions
When should I do fall garage door maintenance in Thunder Bay?
Aim for September or October, before overnight temperatures stay below freezing. Lubricants spread better and seals are easier to replace while it is still mild.
How long does garage door maintenance take?
Most homeowners can complete the basic checklist in about 30 to 60 minutes. A professional tune-up usually takes about an hour.
What lubricant is best for garage doors in cold weather?
Use a silicone or lithium-based spray made for garage doors. Avoid heavy grease and general-purpose oils, which thicken in the cold and collect dirt.
How do I know if my garage door is balanced?
With the door fully closed, pull the emergency release and lift the door by hand to about halfway. A balanced door stays in place. If it drifts up or falls, the springs need adjusting by a professional.
Do I need a professional garage door tune-up every year?
An annual professional tune-up is a good idea, especially in a cold climate. A technician checks springs, cables and drums, which are not safe for homeowners to adjust, and catches worn parts before they fail in winter.